Aerospace Industry Meets TVT Green Machine Cutting Oil

TVT Green is a major Breakthrough

in friction reduction technology

Our proprietary formula restores, protects, and enhances the performance of cutting tools by changing the surface structure of the metal.  It makes the metal harder, smoother, and tighter, which results in an 80-90% reduction in friction (a magnitude different than surface lubricants).  We expect tool life to increase 2-20X and have seen improvements as much at 3,300%.  This breakthrough also provides superior cutting performance and improved surface finish quality. Its use will save money, give a great ROI, reduce noise, reduce downtime, reduce operator frustration, PLUS it is environmentally friendly and American made!  

Here are two testimonials from experts in the aerospace industry on the fantastic performance of TVT Green Machine Cutting Oil.

Frank - Senior Operations Mechanic

I have worked on aircraft for 10 years and used other products like BoeLube but nothing has ever kept a drill bit sharper longer than the TVT Machine Cutting Oil. I was using TVT Oil while drilling through a stack up of metal that was .100 thick aluminum with .090 thick steel behind the first layer. Using a cobalt #30 drill bit I was able to drill 20 holes before the drill bit was done. Now with the TVT Oil, I am able to drill around 50+ holes, with just a few drops on the end of the drill bit. 

Also, when drilling through .5” Titanium, I was able to use one #10 Cobalt bit and one .248 Carbide Core drill bit for 48 holes and the bit was still good after. In the past we had to use anywhere from four to six of each different drill bit for the same result. It saved me time and saved my company money.

Stacy - Operations Mechanic 3

I have 8 holes that must be drilled using a tooling fixture and an automatic power fed drill motor. The holes get drilled through .250’’ of titanium and 6 inches of aircraft aluminum. The drill bit I use is a Guhring .375 Coolant fed bit that lets oil get pushed through the drill bit out to the cutting tip. It cost our company over $300. I can use the same bit on 32 holes before the hole quality is no longer acceptable. I mixed TVT machine oil with my normal coolant at about a 1 to 10 ratio. I was able to drill twice the normal amount with the same drill bit. This stuff really works!