The Full Story

How to use TVT Engine/Vehicle formula
07 Feb 2017
TVT GREEN Application Instructions
IMPORTANT – TVT stands for “TOTAL VEHICLE TREATMENT” – the formula has multiple applications. Make sure the SEALS HAVE SET before adding product into engines. DO NOT use in a WET CLUTCH system or in AUTOMATIC TRANSMISSIONS.
This phenomenal chemistry is actually an “extreme pressure metal enhancing treatment” that is designed to DROP FRICTION BY UP TO 90%, PROTECT METAL FROM WEAR and CREATE A LOW STICK SURFACE. Picture trillions of microscopic, self-leveling super-magnets forming a low stick “Power-Shield” onto and into ALL the metal it comes in contact with. TVT will enhance multiple vehicle systems and components and can be used in:
- Engines
- Differentials
- Fuel System (gas or diesel)
- Front End, Rear End Differential
- Manual (NOT automatic or wet-clutch) Transmissions
- Power Steering
- Wheel Bearings
TVT will quickly OPTIMIZE all of your vehicles - cars, light trucks, vans, motorcycles, ATVs, boats, big rigs, tractors, forklifts, heavy equipment, generators… - RESULTING IN:
- Increased Fuel Efficiency
- Increased Power
- Lower Operating Temps
- Dramatic Reduction in Metal Wear
- Quieter & Smoother Operation
- Extended Asset Life
- + Safety Factor - Possible protection and continued operation of an engine if oil is lost (hitting a pot hole). We do not make any guarantees, but YES, we have seen many cases of vehicles running smoothly after losing engine oil for hundreds and even thousands of miles - NO OIL IN IT!
Facts
- Does not change the properties of the lubricating oil
- Our proprietary formula does not contain ethers, graphite, Teflon, zinc, fluoropolymers, EPA targeted chains, solids or molys
- Compatible with petroleum and synthetic oils
- Not a HAZMAT reportable product & Not DOT regulated as dangerous goods
- OSHA 29 CFR 1910.1200 – lists no ingredient of this product hazardous
- Non-flammable, non-corrosive, non-toxic and eco-friendly
- Add TVT to existing oils and lubricants. DO NOT substitute for oil
- Store indoors or in shade conditions at temperatures of between 32ºF - 80ºF, can be stored up to 5+ years
- Although generally a safe product, some people may have reactions, so wash exposed skin with soap and water. Not for human consumption.
Application Instructions
- Engine - Initial application
- Add 6% or 2oz of TVT per quart of oil (5 quart oil capacity will receive 10oz of TVT)
- Engine - Subsequent applications after oil changes
- Add 3% or 1oz of TVT per quart of oil (5 quart oil capacity will receive 5oz of TVT)
- Fuel System
- GAS - Add 1oz per 5 gallons of fuel (a 15 gallon fuel tank will receive 3oz of TVT) after each oil change.
- DIESEL – Add 1oz per 5 gallons of fuel initial application, then 1oz per 10 gallons of fuel after that. (Diesel fuel has no lubrication - TVT adds the lubrication back - Monitor fuel efficiency to find minimum amount needed for optimum results)
- Front End, Rear End Differential
- Add 6% or 2oz per quart capacity into the system and reapply when fluids are changed on the standard maintenance schedule.
- Manual Transmissions (NOT automatic or wet-clutch) - Initial application
- Add 6% or 2oz of TVT per quart of oil (5 quart oil capacity will receive 10oz of TVT)
- Manual Transmissions (NOT automatic or wet-clutch) - Subsequent applications after trans fluid changes
- Add 3% or 1oz of TVT per quart of oil (5 quart oil capacity will receive 5oz of TVT)
- Power Steering
- Add ½ to 1oz to reservoir (more for larger vehicles)
- All wheel bearings
- With oil lubed systems add 1/2oz of TVT/hub
- With grease lubed systems use TVT Ultra Grease
- Door, Trunk, Hood & Tailgate hinges
- Lube as needed
- 2 Cycle Engines
- Add 1oz/gallon of premixed fuel every 3rd fill-up
- On a continuous feed system, add 2oz/quart directly into the oil reservoir
Contact us if you have questions.
Comments
Your Comment
product CATEGORIES
Featured Products
-
Crystal Clear
$8.50 -
Accuracy Oil
$11.50 -
Carbon Destroyer
$9.50



